Brake cylinder honing device This device is very suitable for the honing of brake cylinders or small engines of a motorcycle, moped, lawn mower and others. Suited for cylinders with a diameter of 58 to 168mm.
Plastic locking nut assortment
Content:
- 30x nut clip for Mitsubishi
- 20x nut clip for Toyota
- 30x nut clip for Toyota and Nissan
- 40x nut clip for Mazda and Nissan
- 25x screw grommet for Mitsubishi
- 40x screw nut for Ford
- 40x headlight nut for Volkswagen and GM
- 20x screw grommet for Toyota
- 25x connecting clip for Mercedes
- 25x screw clip for Renault
- 25x screw grommet for Fiat
Universal caliper wind back kit
This set is suitable for turning and pushing back brake pistons when changing the brake pads and brake discs. The spindle can be adjusted both clockwise and anticlockwise. The set prevents damage to sealing rubbers and dust caps.Suitable for almost any car brand.
1 spindle right thread
1 spindle left thread
2 positioning plates
17 adapter plates
Inner bearing puller set / impact puller set
This bearing puller set is suitable for disassembling inner bearings. Even the most stuck bearings can be removed with the help of the slide hammer.
1x slide hammer of 940 grams and 380mm long
1x internal extractor 12 - 14mm
1x internal extractor 14 - 19mm
1x internal extractor 18 - 25mm
1x internal extractor 25 - 32mm
Exhaust pipe expander kit
This set is suitable for expanding or to re-round the exhaust pipe.
3 expanders:
28 to 44mm
38 to 63mm
54 to 88mm
Oil filter clamp / oil filter wrench / oil filter plier
Suitable for easy replacement of oil filters with a diameter of 63,5 to 98,5mm that are accessible from the front. The 3 arms clamp tightly around the oil filter
drive = 3/8"
Assorted fir tree fixings Contains all kinds of fir tree fixings for general applications and vehicles. Suitable for a number of vehicles: Ford, GM, Mazda, Nissan, Toyota and VW. Content: - 30x radiator yoke, fender and bumper shield retainer - 30x fender and bumper shield retainer - 15x interior trim panel retainer - 15x door trim panel retainer - 50x door weather strip retainer - 10x bumper fascia retainer - 35x hood insulation retainer - 30x fender and bumper shield retainer - 50x cowl grille retainer - 25x retainer for battery post cable shield, radiator side air baffle - 20x retainers - 30x trim panel retainer
Exhaust pipe compressor Suitable for removing and replacing of steel exhaust clamps from Audi, Seat, Skoda and VW vehicles.
Screw thread reparation set / oil drain repair kit
Ideal for repairing of severely damaged screw thread of carter plugs.
This set is suitable for the following car brands: Audi, BMW, Citroën, Mercedes-Benz, Ford, Fiat, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugoet, Porsche, Renault, Saab, Seat, Skoda, Toyota, Volvo and VW.
- 4x thread taps = M13 x 1,5 - M15 x 1,5 - M17 x 1,5 - M20 x 1,5
- 5x carter plug M13 x 1,5 10 sealing rings
- 5x carter plug M15 x 1,5 10 sealing rings
- 5x carter plug M17 x 1,5 10 sealing rings
- 5x carter plug M20 x 1,5 10 sealing rings
Motorcycle special socket
For assembling and disassembling of the full floating axle of a motorcycle.
Suitable for:
- 19mm = Honda
- 22mm = Kawasaki, BMW
- 24mm = Suzuki, Honda, BMW K1, K1000
Nut bolt and stud extractor set
This set is suitable for removing nuts, bolts and stuck studs.
5 bolt removers for left side thread = M3-M6, M6-M8, M8-M11, M11-M14 and M14-M18
4 stud sockets 1/2" drive = 6, 8, 10 and 12mm
9 spiral sockets for 6pt nuts 3/8" drive = 10, 11, 12, 13, 14, 15, 16, 17 and 19mm
material = chrone molybdenum steel
Clutch aligning set
This universal centering set is suitable for very accurate and simple centering of the clutch plate on vehicles with top bearing.
1x centering mandrel with screw thread
8x adapter in sizes: 11 x 18mm, 12 x 18mm, 15 x 18mm, 17 x 18mm, 19 x 18mm, 20 x 18mm, 21 x 18mm, 25 x 18mm
1x conical adapter for larger sizes
Exhaust rubber hooks This hook set is used for applying or removing exhaust rubbers. - 1 curved hook - 1 flat hook 90 degrees
Coil spring compressor set manual
This coil spring compressor set is suitable for quick and safe repair or replacement of the shock absorber and spring strut sets. The robust set is made of hard steel, which guarantees safety and a long service life.
max. working range = 265mm
Interior clips assortment This 192-piece assortment box contains interior clips for dashboard panels, door panels and coating of various vehicles such as Chrysler, Ford, GM, Honda, Renault, Toyota and Volkswagen. Content:
30x ø hole = 6,3mm / ø head = 18mm / length = 2,4 - 13,7mm
20x ø hole = 6,3mm / ø head = 17,3mm / length = 14,3mm
15x ø hole = 7mm / ø head = 19mm / length = 3,2 - 28,5mm
20x ø hole = 8mm / ø head = 20mm / length = 11mm
20x ø hole = 8mm / ø head = 19mm / length = 2 - 12,5mm
12x ø hole = 8mm / ø head = 20mm / length = 20mm
20x ø hole = 9mm / ø head = 16mm / length = 1,5 - 13mm
10x ø hole = 9mm / ø head = 18mm / length = 28mm
10x ø hole = 9,5mm / ø head = 25mm / length = 3 - 14,5mm
15x ø hole = 10mm / ø head = 20mm / length = 13mm
10x ø hole = 10mm / ø head = 21mm / length = 1 - 20mm
10x ø hole = 10mm / ø head = 20mm / length = 18mm
Brake cylinder honing device This device is very suitable for the honing of brake cylinders or small engines of a motorcycle, moped, lawn mower and others. Suited for cylinders with a diameter of 24 to 63,5mm.
Headlight Adjuster
The headlight tester is suitable for testing the headlights of cars, motorcycles and heavier vehicles. This is for the purpose of inspection and correct adjustment of the headlights. The professional headlight adjustment device has a built-in laser and a digital lux meter. The height is easy to adjust and the device has a rotating mirror. The dip in the dim/fog light can be read with an accuracy of 0.1%, the total adjustment range is -0.2 / +8%. Also comes with a mobile undercarriage and can be used on rails and mobile.
min. working height = 200mm
max. working height = 1500mm
Features:
plastic lens
built-in laser
mirror visor
digital lux meter
level
8% infinitely adjustable inclination angle
sliding mechanism to adjust the height
suitable for MOT
Headlight tester This headlight tester is suitable for testing the headlights of cars, motorcycles and heavier vehicles. This for the purpose of inspection and correct adjustment of the headlights. The height is easy to adjust and the device has a rotating mirror.Furthermore, the device does not require power, because it runs on a battery.
min. working height = 230mm
max. working height = 1350mm
digital luxmeter
spirit level
fixed inclination
Slide hammer set This slide hammer set is suitable for internal and external pulling with 2 or 3 legs, as a thru axle puller, wheel hub puller, brake drum puller and sheet metal puller.
slide hammer with shaft
internal puller with 2 and 3 legs
external puller with 2 and 3 legs
locking plier adapter
lip puller
dent puller
hub puller