Universal caliper wind back kit
This set is suitable for turning and pushing back brake pistons when changing the brake pads and brake discs. The spindle can be adjusted both clockwise and anticlockwise. The set prevents damage to sealing rubbers and dust caps.Suitable for almost any car brand.
Content:
1 spindle right thread
1 spindle left thread
2 positioning plates
17 adapter plates
Universal hub puller 3 jaw
Attention: this product can not be returned
Olie pressure gauge / universal oil pressure tester / oil pressure test kit
This oil pressure test set is suitable for checking the oil pressure of an engine. Diagnoses oil pumps and motors, oil pressure switches and indicators. With no less than 10 adapters, the set is suitable for almost all engines.The set consists of a pressure gauge with hose, a 90 degree universal joint and 10 adapters.The pressure gauge is clearly legible, has 2 scales, has a vent valve, a range of 0 - 10bar (0 - 140psi) and a flexible hose of 1200mm with a quick coupling at the end. The 10 adapters can easily be connected here. The 90 degree universal joint ensures that hard to reach places are also accessible.
Adapter sizes:
R 1/8" DIN 2999
1/8" x 27 NPT
1/4" x 18 NPT
3/8" x 20 UNF
1/2" x 20 UNF
M10 x 1,0
M12 x 1,2
M14 x 1,5
M16 x 1,5
M18 x 1,5
Universal puller set
This very extensive universal puller set is suitable for disassembling crankshaft pulleys and crankshaft dampers, among other things. The set is also suitable for the power steering and dynamo pulley. The puller is suitable for pulling with 2 or 3 bolts and the flange is provided with bolt slots.
1x puller flange with 4 holes
1x small centering adapter
1x large centering adapter
1x flat shaft adapter
3x 35mm bolts, M10 x 1,5mm
3x 45mm bolts, M8 x 1,25mm
2x 65mm bolts, M8 x 1,25mm
2x 90mm bolts, M8 x 1,25mm
3x 1-1/2" bolts, 3/8", 24 thread
3x 2" bolts, 3/8", 16 thread
5x 3" bolts, 3/8", 16 thread
2x 4-1/2" bolts, 3/8", 16 thread
2x 6" bolts, 5/16", 18 thread
3x 3-1/2" bolts, 5/16", 18 thread
2x 2-1/2" bolts, 1/4", 28 thread
11x flat rings
Universal axles slide hammer set
- slide hammer with axle
- 1 flange
- 3 hooks
- screw spindle
- towbar
- plate screw
Universal windscreen wiper arm puller - for removing of front and rear wiper arms - brass pressure sleeve prevents damage to the thread - 360 degrees rotatable puller arms - handwheel, no additional tool required - chrome plated base, press sleeve brass made hardened spindle
Vacuum tester brake and bleeding kit This set is suitable for checking the pressure and vacuum systems, but is also suitable for brake bleeding and testing under or over pressure valves.
1 switchable hand pump, for both pumping and sucking
11 universal adapters
2 brake nipple adapters
2x fluid reservoir
2x long hose
3x short hose
Valve lapping tool attachment - facilitates the insertion of valves - automatic change in direction - for use with fine grinding paste - with 8mm shank - min. working speed = 1000rpm - max. working speed = 1250rpm - 4 suction plates = 20, 30, 35 and 45mm - 8mm shaft for attaching the suction cups
Valve polisher pneumatic Suitable for polishing and grinding of valves in the valve seat of the cylinder head. This set contains suction cups with the following diameters: - 20mm - 30mm - 35mm - 45mm
Valve spring plier / valve spring lifter
This heavy duty valve spring compressor is suitable for both old-fashioned and modern cylinder heads with deep-set valves. The valve spring plier is also suitable for larger cylinder heads due to the large lever and robust construction. The valve wedge cam be converted, making the valve spring compressor also suitable for smaller cylinder heads.
clamping range = 35 - 200mm
2 adapters with 25 and 30mm diameter
suitable for +/- 95% of the cars
suitable for both gasoline and diesel engines
Waterpump plier set
sizes = 178mm (7") / 254mm (10") / 305mm (12") / 406mm (16")
chrome-vanadium steel
4 pieces
Welders magnetic earth clamp - 500amp - diameter = 86mm - magnetic pull = 34kg
Welding magnet with on / off switch 13,5kg
Wheel bearing set universal
This set is suitable for mounting bearings and sealing rings. Especially useful when used with a hydraulic press.The set comes with a metal handle for use with a hammer and a length of 273mm and 17 mounting pads with a diameter of 70 tot 150mm.
Wrecking bar set
Lengths:
- 300mm
- 400mm
- 450mm
Wrench set Content: - 10x combination wrench metric = 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm - 10x combination wrench inch = 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" and 7/8" - 5x stubby combination wrench metric = 10, 12, 13, 14 and 17mm - 5x stubby combination wrench inch = 3/8", 7/16", 1/2", 9/16" and 5/8" - 5x C-type spanner metric = 8x10, 11x13, 14x15, 17x19 and 21x22mm - 5x C-type spanner inch = 5/16" x 3/8", 7/16" x 1/2", 9/16" x 5/8", 11/16" x 3/4" and 13/16" x 7/8" - 5x S-type spanner metric = 10x11, 12x13, 14x15, 16x17 and 18x19mm - 5x S-type spanner inch = 3/8" x 13/32", 7/16" x 1/2", 9/16" x 19/32", 5/8" x 11/16" and 11/16" x 3/4" - material = chrome vanadium steel, mat chrome plated
Outils XP aimants de pêche double-face avec une force adhésive de 170 kg utilisent la force de néodyme fort et ont une finition nickelée. Ils attirent sans effort les trésors sous-marins.
Outils XP aimants de pêche double-face avec une force adhésive de 300 kg utilisent la force de néodyme fort et ont une finition nickelée. Ils attirent sans effort les trésors sous-marins.
