Einsatz zu Lochstanze Type: Rund Durchmesser: 34mm

Einsatz zu Lochstanze Type: Rund Durchmesser: 43mm

Einsatz zu Lochstanze Type: Rund Durchmesser: 49mm

Einsatz zu Lochstanze Type: Rund Durchmesser: 51mm

Einsatz zu Lochstanze Type: Rund Durchmesser 60mm

Einsatz zu Lochstanze Rund 80mm

Electric hydraulic pump

Small volume pump with high-performance motor.
The speed and electric power are automatically adjusted during lifting.
Even under high pressure (32MPa), the pump starts easy.
Easy to take anywhere.

- voltage = AC220V 50Hz
- rated power = 0,75Kw
- low pressure = 2,5 Mpa / 25bar
- high pressure = 70Mpa / 700bar
- max. working pressure = 70Mpa / 700bar
- output low pressure = 4 L/min
- output hoge druk = 0,5 L/min
- oil capacity = 2 Ltr

Scherenhubtisch / Scherenhebe / Plattformlift / Hubtisch / fester Hubtisch

Dieser stationäre, elektrische Mammuth-Hubtisch ist ideal für das Bewegen aller Arten von Objekten von bis zu 1000kg nach oben oder unten. Der Hubtisch kann entweder eingebaut oder oberflächenmontiert werden. Der Lift ist mit einem Schaltkasten ausgestattet, der unter dem Tisch montiert wird, und einer Sicherheitskante. Diese Kante sorgt dafür, dass der Lift das Absenken stoppt, wenn etwas darunter gelangt.

Durch den elektrischen Betrieb ist ein ergonomisches Arbeiten gewährleistet.

Technische Spezifikationen:

• Kapazität = 1000kg

• Mindesthöhe = 210mm

• Maximale Höhe = 1000mm

• Plattformgröße = 1300 x 820mm

• Plattformhöhe = 60mm

• Hebezeit entladen = 21 Sek.
  

• Länge der Kabelsteuerung = 3,7m

• Spannung = 230V

• Leistung = 1,1kW

• Öl Kapazität = 1,5L
  

Hinweis: Der Hubtisch wird ohne Stecker geliefert!

Scherenhubtisch / Scherenhebe / Plattformlift / Hubtisch / fester Hubtisch

Dieser stationäre, elektrische Mammuth-Hubtisch ist ideal für das Bewegen aller Arten von Objekten von bis zu 2000kg nach oben oder unten. Der Hubtisch kann entweder eingebaut oder oberflächenmontiert werden. Der Lift ist mit einem Schaltkasten ausgestattet, der unter dem Tisch montiert wird, und einer Sicherheitskante. Diese Kante sorgt dafür, dass der Lift das Absenken stoppt, wenn etwas darunter gelangt.

Durch den elektrischen Betrieb ist ein ergonomisches Arbeiten gewährleistet.

Technische Spezifikationen:

• Kapazität = 2000kg

• Mindesthöhe = 230mm

• Maximale Höhe = 1000mm

• Plattformgröße = 1600 x 1000mm

• Plattformhöhe = 60mm

• Hebezeit entladen = 17 Sek.
  

• Länge der Kabelsteuerung = 3,7m

• Spannung = 400V

• Leistung = 2,2kW

• Öl Kapazität = 3L
  

Hinweis: Der Hubtisch wird ohne Stecker geliefert!

Elektrischer Palettenhubwagen / Palettenhubwagen / Handpalettenhubwagen

This Mammuth semi-electric pallet truck with protective cover offers all the advantages of a standard hand pallet truck and extends it with the convenience of electric drive.

The pallet truck is of very high quality and progressive on the market. The motor is maintenance-free and brushless, the 48V lithium battery is removable and is charged using the supplied external 230V charger. The pump truck drives electric, but pumps manually. The electric drive ensures that moving heavy pallets up to 2000kg is effortless.

Furthermore, the size of the electric pallet truck is almost the same as the size of a standard pallet truck, so working with the electric pallet truck is much more efficient than with a standard pallet truck.

Easy to operate with the multifunctional ergonomic handle. This handle is equipped with control buttons for driving, a horn, a lever for lifting, an emergency button, a battery indicator and a function that warns when the battery needs to be charged. From 5% or lower, the battery indicator starts to flash, so that the battery can be charged in time.

Specifications:

• capacity = 2000kg
• fork length x width x height = 1150 x 160 x 83mm
• lifting range = 83 - 190mm
• total width = 550mm
• driving speed loaded = 3,5km/h
• driving speed unloaded = 5km/h
• max. gradeability loaded = 5%
• max. gradeability unloaded = 20%
• turning radius = 1353mm
• battery = 48V - 10Ah lithium-ion
• double front wheel
• material wheels = PU
• diameter steering wheel = 180mm
• diameter load wheel = 75mm
• dimensions = 1570 x 550 x 1310mm
• weight = 112kg
  

Scherenwagenheber elektrisch

- min. height = 130mm
- max. height = 350mm
- capacity = 2000kg
- voltage = 12V
- current (unloaded) = 8amp

Garagenpresse / Lagerpresse / Rahmenpresse

This Mammuth electric press is very suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other pressing work that requires a lot of power. The is press is of high quality and consists of a heavy, robust, fully welded frame. This makes the press very solid and stable.

The work bed is easy to adjust in height using the winch and handle. The cylinder can also be slid from left to right using the same handle.

The press comes standard with a safety grille, foot pedal, emergency stop and two press blocks.

Please note: the press is supplied without CH22 hydraulic oil (29 liters).

Specifications:

• capacity = 100 ton

• cylinder stroke = 300mm

• bed width = 800mm

• bed depth = 342mm

• working range = 945mm

• power = 1,5kW

• voltage = 400V

• speed = 1400rpm

• outgoing press speed = 12 - 24cm/min or 2 - 2,33mm/sec

• incoming press speed = 21 - 23cm/min or 3,5 - 3,83mm/sec

Packed in 2 boxes:
115 x 42 x 216cm 735kg
52,5 x 36,5 x 79cm 85kg

Garagenpresse / Lagerpresse / Rahmenpresse

This Mammuth electric press is very suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other pressing work that requires a lot of power. The is press is of high quality and consists of a heavy, robust, fully welded frame. This makes the press very solid and stable.
The work bed is easy to adjust in height using the winch and handle. The cylinder can also be slid from left to right using the same handle.

The press comes standard with a safety grille, foot pedal and an emergency stop.

Please note: the press is supplied without CH22 hydraulic oil (29 liters).

Specifications:

• capacity = 150 ton

• cylinder stroke = 350mm

• bed width = 1000mm

• bed depth = 460mm

• working range = 945mm

• power = 1,5kW

• voltage = 400V

• speed = 1400rpm

• outgoing press speed = 12 - 24cm/min or 2 - 2,33mm/sec

• incoming press speed = 21 - 23cm/min or 3,5 - 3,83mm/sec

Packed in 2 boxes:
138 x 56,5 x 225cm 1200kg
52,5 x 36,5 x 79cm 85kg

Note: This press comes without press blocks. Look below at related items for the relevant press blocks.

Garagenpresse / Lagerpresse / Rahmenpresse

This Mammuth electric press is very suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other pressing work that requires a lot of power. The is press is of high quality and consists of a heavy, robust, fully welded frame. This makes the press very solid and stable.
The work bed is easy to adjust in height using the winch and handle.

The press comes standard with a safety grille, foot pedal, emergency stop and two press blocks.

Please note: the press is supplied without CH22 hydraulic oil (29 liters).

Specifications:

• capacity = 50 ton

• cylinder stroke = 200mm

• bed width = 730mm

• working range = 1018mm

• power = 1,5kW

• voltage = 400V

• speed = 1400rpm

• outgoing press speed = 12 - 24cm/min or 2 - 2,33mm/sec

• incoming press speed = 21 - 23cm/min or 3,5 - 3,83mm/sec

Packed in 2 boxes:
98,8 x 31,5 x 202cm 328kg
52,5 x 36,5 x 79cm 85kg

Garagenpresse / Lagerpresse / Rahmenpresse

This Mammuth electric press is very suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other pressing work that requires a lot of power. The is press is of high quality and consists of a heavy, robust, fully welded frame. This makes the press very solid and stable.
The work bed is easy to adjust in height using the winch and handle.

The press comes standard with a safety grille, foot pedal, emergency stop and two press blocks.

Please note: the press is supplied without CH22 hydraulic oil (29 liters).

Specifications:

• capacity = 75 ton

• cylinder stroke = 250mm

• bed width = 800mm

• bed depth = 280mm

• working range = 945mm

• power = 1,5kW

• voltage = 400V

• speed = 1400rpm

• outgoing press speed = 12 - 24cm/min or 2 - 2,33mm/sec

• incoming press speed = 21 - 23cm/min or 3,5 - 3,83mm/sec

Packed in 2 boxes:
109 x 32,5 x 204cm 463kg
52,5 x 36,5 x 79cm 85kg

Entfetterpistole mit Pinsel

• Schlauchanschluss = 6mm

Erweiterung / Frontblende

This extension provides a longer motorcycle lift and is suitable for the ML75HAS.
In combination with the widening set, the lift is also suitable for trikes.

• length panel = 720mm

• width panel = 610mm

• total extension motorcycle lift = 425mm

This Mammuth foldable jack stand is provided with a srew spindle with which the jack can easily be adjusted to the correct height with the help of a handle.
The jack is foldable and therefore easy to store and carry.

• capacity = 12 ton

• min. hight = 456mm

• max. hight = 740mm

Fassroller

With a capacity of 300kg, robust welded stainless steel construction and 4 swivel castors, this drum trolley is very suitable for the easy transport of upright 200L drums.

• capacity = 300kg

• oil drum size = 200L

• diameter = 610mm

• castor size = 75 x 35mm

• material = stainless steel

Hydraulischer Flanschspreizer

Dieser Universal Flanschspreizer ist standardmäßig mit einer C18S-Hydraulikkupplung ausgestattet. Damit eignet sich der Spreizer als Ersatz für die Ausbeulsets PHE04 und PHE10.

Dank seiner kompakten Größe kann der Streuer auf engstem Raum eingesetzt werden.

Technische Spezifikationen:

• Kapazität = 500kg

• Anschluss = 1/4'' NPT-Gewinde