Chisel flat - length 220 mm - width 60 mm - with handprotection grip
Stufenbohrer Satz M2 Content: - drill 1 = 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12mm - drill 2 = 2 / 4 / 6 / 8 / 10 / 12 / 14 / 16 / 18 / 20mm - drill 3 = 4 / 6 / 8 / 10 / 12 / 14 / 16 / 18 / 20 / 22 / 24 / 26 / 28 / 30 / 32mm - titanium coated
Stützblock Werkstattpresse This universal support block is designed to be used with a workshop press. Multiple threaded drillings in a heavy duty aluminum base plate allows the support bars to be installed in any position. Ideal for the removal of wheel bearings. Content: - 1x base block - 1x packaging block - 1x support rod = 110mm - 3x support rod = 150mm - 1x support rod = 190mm - 4x support ring = M8 - 4x support ring = M16 - 3x support nut = M16 - 1x adjustment bolt = M16 x 80mm - 4x adjustment bolt = M6 x 22mm with head - 2x protection plate
Stützrad Klammer
Durchmesser = 48mm
Befestigungslöcher von Mitte zu Mitte = 105mm
Durchmesser Befestigungslöcher = 10,5mm
Assorted fir tree fixings Contains all kinds of fir tree fixings for general applications and vehicles. Suitable for a number of vehicles: Ford, GM, Mazda, Nissan, Toyota and VW. Content: - 30x radiator yoke, fender and bumper shield retainer - 30x fender and bumper shield retainer - 15x interior trim panel retainer - 15x door trim panel retainer - 50x door weather strip retainer - 10x bumper fascia retainer - 35x hood insulation retainer - 30x fender and bumper shield retainer - 50x cowl grille retainer - 25x retainer for battery post cable shield, radiator side air baffle - 20x retainers - 30x trim panel retainer
Teleskop pick up tool This pick up tool has 0,7kg magnetic power. It is telescopic from 125mm to 635mm.
Teleskop Spiegel - diameter mirror = 53mm
Impact socket set torx
This XPTools impact socket set with torx profile is especially suitable for use on an air wrench.
sizes = T30, T40, T45, T50, T55, T60, T70 and T80
connection = 1/2"
length of sockets = 80mm
material = chrome molybdenum steel
Ball joint extractor set
This set is suitable for unmounting steering rods and for all kinds of other types of dismantling work. Thanks to the wedge-shaped forks, hinge pins clamped in the conical seat can be quickly released.This set comes in a handy plastic transport case.
Content:
1x steering fork 17mm opening
1x steering fork 24mm opening
1x steering fork 28mm opening
handle for manual use 200mm long
adapter for pneumatic use 180mm long
Trichter - round model - 145mm
Trichter - round model - 215mm
Trichter - square model - 280mm
TU-114 Kraftstoff Druckmesser für Benzin-Motoren
This set is suitable for testing the fuel pressure of almost all injection systems, also suitable for injection systems with a Schrader test port.The pressure gauge is clearly legible, has 2 scales, a range of 0 - 10bar (0 - 140psi) and a flexible hose of 410mm.The set consists of a number of adapters and fittings, components which are equipped with a quick coupling and a pressure relief valve. The pressure relief valve is equipped with a drain hose for the safe draining of fuel.
Armature bearing puller drop forged with CR-V - jaw size = 19-35mm Attention: this product can not be returned
Armature bearing puller
drop forged with CR-V
- jaw size = 24-55mm
Attention: this product can not be returned
- jaw size = 35-80mm
Universal Abzieher Satz
This very extensive universal puller set is suitable for disassembling crankshaft pulleys and crankshaft dampers, among other things. The set is also suitable for the power steering and dynamo pulley. The puller is suitable for pulling with 2 or 3 bolts and the flange is provided with bolt slots.
1x puller flange with 4 holes
1x small centering adapter
1x large centering adapter
1x flat shaft adapter
3x 35mm bolts, M10 x 1,5mm
3x 45mm bolts, M8 x 1,25mm
2x 65mm bolts, M8 x 1,25mm
2x 90mm bolts, M8 x 1,25mm
3x 1-1/2" bolts, 3/8", 24 thread
3x 2" bolts, 3/8", 16 thread
5x 3" bolts, 3/8", 16 thread
2x 4-1/2" bolts, 3/8", 16 thread
2x 6" bolts, 5/16", 18 thread
3x 3-1/2" bolts, 5/16", 18 thread
2x 2-1/2" bolts, 1/4", 28 thread
11x flat rings
Öldruckmesser / Universal Öldruck Tester
This oil pressure test set is suitable for checking the oil pressure of an engine. Diagnoses oil pumps and motors, oil pressure switches and indicators. With no less than 10 adapters, the set is suitable for almost all engines.The set consists of a pressure gauge with hose, a 90 degree universal joint and 10 adapters.The pressure gauge is clearly legible, has 2 scales, has a vent valve, a range of 0 - 10bar (0 - 140psi) and a flexible hose of 1200mm with a quick coupling at the end. The 10 adapters can easily be connected here. The 90 degree universal joint ensures that hard to reach places are also accessible.
Adapter sizes:
R 1/8" DIN 2999
1/8" x 27 NPT
1/4" x 18 NPT
3/8" x 20 UNF
1/2" x 20 UNF
M10 x 1,0
M12 x 1,2
M14 x 1,5
M16 x 1,5
M18 x 1,5
Universell Scheibenwischerarm Abzieher - for removing of front and rear wiper arms - brass pressure sleeve prevents damage to the thread - 360 degrees rotatable puller arms - handwheel, no additional tool required - chrome plated base, press sleeve brass made hardened spindle
Vakuum test und Druckentlastung Satz
This set is suitable for checking the pressure and vacuum systems, but is also suitable for brake bleeding and testing under or over pressure valves.
1 switchable hand pump, for both pumping and sucking
11 universal adapters
2 brake nipple adapters
2x fluid reservoir
2x long hose
3x short hose
