Nail shooter and staple gun
This ZionAir handy and safe 2 in 1 nailer and staple gun is ideal for securing thin wooden plates, for example. Thanks to the quick closure on the magazine, nails and staples are easy to load and switching between staples and nails is no problem during work. The gun is also equipped with a so-called sequential trigger. This ensures accurate fastening and extra security. Involuntary shooting is therefore not possible.
Technical specifications:
capacity staples = 100
capacity nails = 100
length of the staples = 16 - 40mm
length of the nails = 15 - 50mm
average air consumption = 25,5L/min
air inlet = 1/4" (male connector included)
working pressure = 6,3 bar
recommended air hose = 10mm inside diameter (3/8")
The specified air consumption is indicated at a pressure of 6,3 bar.
The air output at compressors is measured at ambient pressure, so these 2 values cannot be compared with each other.
If you need advise, consult one of our experts.
Spray paint on air
This ZionAir pneumatic paint sprayer is a very high-quality paint sprayer that sprays a beautifully evenly distributed surface. Ideal for painting cars or painting woodwork around and in the home such as window frames, doors and such. The spray gun is equipped with a standard 1.3mm needle, top cup, pressure regulator and a handy storage case.
standard needle = 1.3mm
cup content = 500ml
average air consumption = 130L/min
working pressure = 2,0 bar
Portable sandblaster with vacuum system This sandblaster with vacuum is ideal for removing rust and paint. By using the vacuum system most of the abrasive is sucked up again.
Specifications:
working pressure = 3 - 6 bar
capacity = 80 liter
minimum air consumption = 350L/min
connection = 1/4"
hose length = 2,5m
Suitable for the sand blasting cabinets SB22A, SB22AB, SB35A, SB42A, SB42AB, SB99A and SB120A.
Sand blast cabinet / sand blaster - working area = 690 x 460 x 420mm - inner dimensions low side = 460 x 200mm - inner dimensions high side = 460 x 420mm - load capacity = 20kg - voltage = 230V - max. working pressure = 8 bar - air consumption = 200L/min - diameter of nozzles = 4, 5, 6, 7mm including: - rubber / vinyl gloves - blasting gun SB220LG with nozzles - protection foils - lighting - foam band
Not suitable for soda blasting.
Sand blast cabinet / sand blaster This sand blast cabinet has two large doors, which can both be worked on. If you are blasting a heavy object you don't need to turn it around, just walk to the other door and blast it from there. - working area = 1180 x 1300 x 850 - load capacity = 60kg - voltage = 230V - working pressure = 4 - 8 bar - air consumption = 700L/min per blasting gun - diameter of nozzles = 6, 7mm - capacity = 60kg including:
- foot pedal - rubber / vinyl gloves - blasting gun SB420LG with 6 nozzles - protection foils - lighting - air regulator - extraction - foam band
Sand blast cabinet / sand blaster / blasting cabinet
inner dimensions = 755 x 500 x 290/440mm
voltage = 230V
max. working pressure = 5,5 - 8bar
air consumption = min. 190L/min
diameter of nozzles = 4, 5, 6, 7mm
Including:
rubber / vinyl gloves
blasting gun SB220LG with nozzles
protection foils
lighting
foam band
Sand blast cabinet / sand blaster - working area = 600 x 840 x 630mm - size opening side door = 510 x 420mm(max) - load capacity = 20kg - voltage = 230V - working pressure = 4 - 8 bar - air consumption = 420 - 710L/min - diameter of nozzles = 4, 5, 6, 7mm including: - rubber / vinyl gloves - blasting gun SB220LG with nozzles - protection foils - lighting - air regulator - 1 side door - foam band
Sand blast cabinet / sand blaster This type cabinet is delivered as an construction kit and needs to be assembled by yourself. - working area = 850 x 560 x 550 - load capacity = 20kg - voltage = 230V - working pressure = 4 - 8 bar - air consumption = 420 - 710L/min - diameter of nozzles = 4, 5, 6, 7mm including: - rubber / vinyl gloves - blasting gun SB220LG with nozzles - protection foils - lighting - air regulator - front door - foam band
Sand blast cabinet / sand blaster - working area = 945 x 605 x 605mm - load capacity = 60kg - capacity for approx. 40lb sand - voltage = 230V - working pressure = 4 - 8 bar - air consumption = 160 - 700L/min - diameter of nozzles = 6, 7mm including:
- foot pedal - rubber / vinyl gloves - blasting gun SB220LG with 4 nozzles - protection foils - lighting - air regulator - extraction - 2 side doors - foam band
Sand blast cabinet / sand blaster - working area = 1210 x 590 x 570mm - size side door = 550 x 540mm - size front door = 1215 x 410mm - protection glass for lighting = 620 x 120 - load capacity = 40kg - voltage = 230V - working pressure = 4 - 8 bar - air consumption = 160 - 700L/min - diameter of nozzles = 6, 7mm including:
- foot pedal - rubber / vinyl gloves - blasting gun SB420LG with nozzles - protection foils - lighting - air regulator - extraction - foam band
Sand blast cabinet / sand blaster - working area = 1170 x 890 x 840mm - protection glass for lighting = 950 x 310 - load capacity = 60kg - voltage = 230V - working pressure = 4 - 8 bar - air consumption = 700L/min - diameter of nozzles = 6, 7mm including:
SandblasterSandblast parts before welding or painting.Use alluminum oxide or glass beads for cleaning.Equipped with a sandblast gun, nozzles, pressure gauge, mask, funnel, hose and pressure regulator.
tank volume = 40L / 10 gallon
working pressure = 4,5 - 8,5 bar
air consumption = min 170 - max 700 L/min
Sandblaster Sandblast parts before welding or painting. Use alluminum oxide or glass beads for cleaning. Equipped with a sandblast gun, nozzles, pressure gauge, mask, funnel, hose and pressure regulator.
tank volume = 63L / 20 gallon
Portable sandblaster
This ZionAir powerful sandblaster is only suitable for blasting with soda abrasive. Blasting with soda (sodium bi-carbonate) is a soft way of blasting. Due to this low hardness, the abrasive is suitable for many different applications, without damaging the surface. Furthermore, soda is very environmentally friendly and completely soluble in water.The blaster is equipped with a blasting gun with 3 ceramic nozzles (0,5mm, 1mm, 1,5mm), a hose of 1,5 meter, 2 solid wheels and a sturdy handle.
tank capacity = 26 liters
working pressure = 4 - 8,6 bar
average air consumption = 350L/min
Double sandblasting cabinet / Sandblasting cabinet / blasting cabinet / blasting cabinetcabinet
This double sandblasting cabinet from ZionAir is ideal for the safe sandblasting of large workpieces. Thanks to the double doors and blast guns, two people can work at the same time. Two dust extractors are installed at the back, so the windows continue to offer good visibility. The sandblasting cabinet can be turned on and off using the foot pedal.
Technical specifications
nozzle size = 6.0 / 7.0 mm
maximum volume = 52 liters (each hopper is 26L)
total dimensions = 206 x 173.8 x 99.1cm
working pressure = 8.6 BAR
dimensions working space = 200 x 68 x 65 cm (750m3)
sand diameter = grain 20-120
power lamp = 4x13w, 4000lumen
net loaded = 50kgs
net weight = 195kg
Soda blaster This soda blasting gun is suitable for removing paint and rust without damaging the body. The blaster is not only suitable for the body, but also for rims and parts such as cylinder heads, valves and pistons. Because soda does not penetrate deep into the material it prevents damage and rust formation. Soda blasting only has an effect on metal and not on rubber and glass, making this blaster ideal for work on cars. Furthermore, the soda blaster is also suitable for the removal of algae from boats, the paint of window frames and the spilled paint on windows. - air consumption = 180L/min at 5 to 8 bar - air inlet = 1/4" BSPT internal thread - content = 1kg of soda
This set consists of a window, mesh and glass and is suitable for the sand blasting mask SBH0999SH.
This low noise compressor with 1.2 hp and 8L tank is part of the latest innovative oil free Airpro range. With its oversized fan cooling system, this compressor is able to maintain optimal performance without overheating. Plus, it’s completely oil and maintenance free. It also comes with overheat and overload protection, so you can rest assured that it’s built to last.The compressor also features a patented microfiber air filter system, ensuring that the compressed air is clean and free from impurities. With a high air flow and low noise level of 70 dB, this compressor offers impressive performance without causing too much disruption. The input voltage is 230V with an input power of 900W, and a motor speed of 2800rpm.
This low noise compressor with 2 hp and 24L tank is part of the latest innovative oil free Airpro range. With its oversized fan cooling system, this compressor is able to maintain optimal performance without overheating. Plus, it’s completely oil and maintenance free. It also comes with overheat and overload protection, so you can rest assured that it’s built to last.The compressor also features a patented microfiber air filter system, ensuring that the compressed air is clean and free from impurities. With a high air flow and low noise level of 72 dB, this compressor offers impressive performance without causing too much disruption. The input voltage is 230V with an input power of 1450W, and a motor speed of 2800rpm.
