Combination wrench set

-size = 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 22mm
-standard = din3113 (Form A, Iso 3318)
-material = chrome vanadium steel 31CrV 3
-cold stamped

Combination wrench set

-size = 6, 7, 8, 10, 11, 12, 13, 14, 15, 17, 19, 22mm
-standard = din3113 (Form A, Iso 3318)
-material = chrome vanadium steel

Combination wrench set

- sizes = 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19, 22

Combination wrench set

- sizes = 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 23, 24

Combination wrench set

• sizes = 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16"

• standard = DIN3113 (Form A, ISO 3318)

• material = chrome vanadium steel

Combination wrench set

• sizes = 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8" and 1-1/4"

• standard = DIN3113 (Form A, ISO 3318)

• material = chrome vanadium steel

Combination wrench set

• sizes = 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30 and 32mm

• norm = DIN 3113 Form A, ISO 3318

• material = chrome vanadium steel

Combination wrench set sae

- sizes = 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8

Combination wrench set stubby

- sizes = 10, 11, 12, 13, 14, 15, 16, 17, 18, 19

Combination wrench set stubby sae

- sizes = 7/16, 1/2, 9/16, 5/8, 11/16, 3/4
- sae

Common rail diesel tester set

This retour flow meter with adaptors is suitable for measuring how much fuel the injectors return. This makes it immediately clear whether an injector is defective.
With this set it is possible to control up to 6 injectors at the same time from the systems of Bosch, Denso, Siemens and Delphi.

Content:

• 6x adapter for Bosch injectors

• 6x adapter for Denso injectors

• 6x adapter for Siemens injectors

• 6x adapter for Delphi injectors

• 6x measuring tube 95ml

• 6x measuring cup 105ml with connecting hoses of 65cm and a connecting piece

• 1x aluminum strip with hook for mounting on the hood

Compression tester kit diesel

This tester kit is suitable for the measurement of compression loss in almost every diesel engine from both cars and trucks.
The pressure gauge has a range of 0 - 70bar (0 - 1000psi) and a flexible hose of 360mm. Furthermore, the compression meter is equipped with a built-in resetter.

4 injector adapters:

• M20 x 1,5 x 75mm

• M22 x 1,5 x 73mm

• M24 x 1,5 x 88mm

• M24 x 2,0 x 63mm

9 glow plugs adapters:

• M10 x 1,0 x 83mm

• M10 x 1,0 x 91mm

• M10 x 1,0 x 102mm

• M10 x 1,0 x 113mm

• M10 x 1,0 x 119mm

• M10 x 1,25 x 64mm

• M10 x 1,25 x 135mm

• M12 x 1,25 x 47mm

• M22 x 1,5 x 118mm

Compression tester kit

This tester set is suitable for quickly measuring cmopression loss in car and motorcycle. This way can be find out whether the vehicle's engine has internal defects, such as broken valves, worn piston rings or gaskets or an unnecessary amount of carbon.
The set consists of a pressure gauge with a range of 0 - 20 bar (0 - 300psi), a flexible hose of +/- 45cm, a straight and bent pressure tube with rubber conical connection and several adapters with screw thread: M10, M12, M14 and M18.
The pressure gauge is clearly legible, has 2 scales and has a vent valve. The straight and bent pressure tubes do not have to be turned and are therefore suitable for almost any motor.

Compression tester kit

This tester set is suitable for quickly measuring cmopression loss in car and motorcycle. This way can be find out whether the vehicle's engine has internal defects, such as broken valves, worn piston rings or gaskets or an unnecessary amount of carbon.
The set consists of a pressure gauge with a range of 0 - 20 bar (0 - 300psi), a flexible hose of +/- 45cm, a straight pressure tube with rubber conical connection.
The pressure gauge is clearly legible, has 2 scales and has a vent valve. The straight pressure tube does not have to be turned and is therefore suitable for almost any motor.

HSS Core drill

High-quality HSS core drill for magnetic drilling machines.

Characteristics:

• HSS (high speed steel)

• M35: comparable to M2 standard high speed steel, but with 5% cobalt added. M35 cuts faster and lasts longer than M2.

Specifications:

• diameter = 12mm

• cutting depth = 30mm

TCT Core drill

High-quality TCT core drill for magnetic drilling machines.

Characteristics:

• TCT (tungsten carbide tipped): Core drill with hard metal teeth. Used for materials that are harder to machine, such as hardox and stainless steel.

Specifications:

• diameter = 12mm

• cutting depth = 50mm

HSS Core drill

High-quality HSS core drill for magnetic drilling machines.

Characteristics:

• HSS (high speed steel)

• M35: comparable to M2 standard high speed steel, but with 5% cobalt added. M35 cuts faster and lasts longer than M2.

Specifications:

• diameter = 13mm

• cutting depth = 30mm

TCT Core drill

High-quality TCT core drill for magnetic drilling machines.

Characteristics:

• TCT (tungsten carbide tipped): Core drill with hard metal teeth. Used for materials that are harder to machine, such as hardox and stainless steel.

Specifications:

• diameter = 13mm

• cutting depth = 50mm

HSS Core drill

High-quality HSS core drill for magnetic drilling machines.

Characteristics:

• HSS (high speed steel)

• M35: comparable to M2 standard high speed steel, but with 5% cobalt added. M35 cuts faster and lasts longer than M2.

Specifications:

• diameter = 14mm

• cutting depth = 30mm

TCT Core drill

High-quality TCT core drill for magnetic drilling machines.

Characteristics:

• TCT (tungsten carbide tipped): Core drill with hard metal teeth. Used for materials that are harder to machine, such as hardox and stainless steel.

Specifications:

• diameter = 14mm

• cutting depth = 50mm