Categories

Spring compressor kit Mercedes [OPT06VM] Spring compressor kit Mercedes
mm mm mm Kg Spring compressor kit Mercedes

Sizes:
- diameter 70 tot 130
- diameter 90 tot 150
Shop equipment / Automotive / Automotive JMC OPT06VM 8720028076512
€ 129.49 Incl. VAT https://schema.org/SoldOut
€ 129.49 129.49 EUR
Flaring tool set 5 pieces [XP05FG] Flaring tool set 5 pieces
mm mm mm Kg

Brake line flare set

This flaring set is suitable for double and single collars of copper, aluminum and mild steel brake lines and brass pipes up to 45 degrees.

Content:

  • pipe holder with metric sizes = 6, 8, 10, 12, 16 and 19mm

  • pipe holder with inch sizes = 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4"

  • pipe cutter

  • spreader

Shop equipment / Automotive / Automotive XPTools XP05FG 8720028076529
€ 36.30 Incl. VAT https://schema.org/SoldOut
€ 36.30 36.300000000000004 EUR
TU-114 Fuel pressure meter for gasoline engines 20 pieces [XP20CTOB] TU-114 Fuel pressure meter for gasoline engines 20 pieces
mm mm mm Kg

TU-114 Fuel pressure gauge for gasoline engines

This set is suitable for testing the fuel pressure of almost all injection systems, also suitable for injection systems with a Schrader test port.
The pressure gauge is clearly legible, has 2 scales, a range of 0 - 10bar (0 - 140psi) and a flexible hose of 410mm.
The set consists of a number of adapters and fittings, components which are equipped with a quick coupling and a pressure relief valve. The pressure relief valve is equipped with a drain hose for the safe draining of fuel.

Shop equipment / Automotive / Automotive XPTools XP20CTOB 8720028071845
€ 36.30 Incl. VAT https://schema.org/InStock
€ 36.30 36.300000000000004 EUR
Ball joint extractor fork type set 5 pieces [XP01BJF] Ball joint extractor fork type set 5 pieces
mm mm mm Kg

Ball joint extractor set

This set is suitable for unmounting steering rods and for all kinds of other types of dismantling work. Thanks to the wedge-shaped forks, hinge pins clamped in the conical seat can be quickly released.
This set comes in a handy plastic transport case.

Content:

  • 1x steering fork 17mm opening

  • 1x steering fork 24mm opening

  • 1x steering fork 28mm opening

  • handle for manual use 200mm long

  • adapter for pneumatic use 180mm long

Shop equipment / Automotive / Automotive XPTools XP01BJF 8720028050475
€ 21.18 Incl. VAT https://schema.org/InStock
€ 21.18 21.18 EUR
Torque angle gauge 360 degrees [XP02DHM] Torque angle gauge 360 degrees
mm mm mm Kg

Protractor wrench / rotational angle gauge

This torque angle gauge is suitable for retightening of cylinder head bolts, among other things, under a certain number of degrees after tightening at a set moment.
The protractor wrench can be used with a torque wrench, ratchet or socket wrench. The scale is clearly legible.
Fixed with the clamping screw and adjustable locking pin.

  • 1/2" internal and external

  • 360 degrees, series in 2 degrees

Shop equipment / Handtools / Torque wrenches / Accessoires / attachments XPTools XP02DHM 8720028073665
€ 6.05 Incl. VAT https://schema.org/InStock
€ 6.05 6.05 EUR
Universal lock-out tool set [LOS0081] Universal lock-out tool set
mm mm mm Kg Emergency car opening set

Produced for the purpose of opening door of both domestic and foreign vehicles.

- material = alloy steel and plastic
- packing = pouch
Shop equipment / Automotive / Automotive JMC LOS0081 8720028075812
€ 9.68 Incl. VAT https://schema.org/SoldOut
€ 9.68 9.68 EUR
Cup filter wrench set 15 pieces [CWS14D] Cup filter wrench set 15 pieces
mm mm mm Kg

Oil filter caps / oil filter cap set / oil filter disassembly set

This set is suitable for mounting and dismounting almost any oil filter from a large number of types of cars and motorcycles.
Caps with 14, 15, 30 and 36P are suitable for all filters from 65mm to 100mm.\

  • drive = 3/8"

  • adaptor 1/2" to 3/8"

Sizes caps:

  • 65mm 14P = Toyota / Nissan

  • 65 / 67mm 14P = Ford / Mazda

  • 68mm 14P = Mazda / Ford / Subaru

  • 73mm 14P = Toyota / Audi / Rover / Lexus / Austin

  • 74 / 76mm 15P = VW / Audi / GM / Mercedes / Opel

  • 75 / 77mm 15P = Fiat / Renault

  • 76mm 14P = Motorcraft / Ford

  • 76mm 30P = Fiat / Lancia

  • 80mm 15P = Mazda / Subaru / Toyota / Honda / Nissan

  • 80 / 82mm 15P = Volvo

  • 90mm 15P = Fiat

  • 93mm 15P = Nissan / VW / Porsche / Renault / Honda / Audi

  • 93mm 36P = Ford / Motorcraft

  • 100mm 15P = Isuzu / Mitsubishi

Shop equipment / Automotive / Automotive XPTools CWS14D 8720028054411
€ 27.23 Incl. VAT https://schema.org/SoldOut
€ 27.23 27.23 EUR
Trim upholstery removal set 5 pieces [XP05SBD] Trim upholstery removal set 5 pieces
mm mm mm Kg

Handy remover set

This set is ideal for assembling or disassembling upholstery without damaging the car paint.
Various types and models for rubber seals, dashboard, door panels, switches etc.

Shop equipment / Automotive / Automotive XPTools XP05SBD 8720028073214
€ 7.26 Incl. VAT https://schema.org/InStock
€ 7.26 7.26 EUR
Bearing puller set 8 pieces [HSP4B] Bearing puller set 8 pieces
mm mm mm Kg

Bearing puller set
This bearing puller set is suited for the loosening of bearings, bolts, nuts and pulleys.

  • capacity = 20 - 100mm

Content:

  • 1x bearing separator

  • 4x main rod

  • 1x H-beam

  • 1x hydraulic ram

  • 1x extension rod

Shop equipment / Automotive / Automotive XPTools HSP4B 8720028075836
€ 96.80 Incl. VAT https://schema.org/InStock
€ 96.80 96.8 EUR
Internal and external puller set 5 pieces [GPIE201] Internal and external puller set 5 pieces
mm mm mm Kg

Internal and external puller set

This internal and external puller set is suitable for disassembling oil seals and ball bearings, for example. This set comes in a handy plastic transport case.

Content:

  • 1x small internal puller 15-30mm

  • 1x large internal puller 30-80mm

  • 1x external puller 15-80mm

  • 1x locking nut

  • 1x slidehammer

Shop equipment / Automotive / Automotive XPTools GPIE201 8720028063437
€ 54.45 Incl. VAT https://schema.org/SoldOut
€ 54.45 54.45 EUR
Bearing puller set 14 pieces [BS3H] Bearing puller set 14 pieces
mm mm mm Kg

Bearing puller set

This bearing puller set is suited for the loosening of bearings, inner rings, bolts, nuts and pulleys.

Content:

  • 1 bearing splitter 30-50mm (1-1/4"  -  2-1/4")

  • 1 bearing splitter 50-75mm (2-1/4"  -  3-1/4")

  • H-type puller head

  • forcing screw

  • 2x 4" extension screw external and internal

  • 2x 5" extension screw external and internal

  • 2x 4" extension screw external

  • 2x 5" extension screw external

Shop equipment / Automotive / Automotive XPTools BS3H 8720028064519
€ 54.45 Incl. VAT https://schema.org/InStock
€ 54.45 54.45 EUR
Headlight tester set [KT01ALR] Headlight tester set
mm mm mm Kg

Headlight tester set / headlight adjustment set

This headlight tester set includes rails, H-base and headlight tester. The headlight tester set is suitable for testing the headlights of cars, motorcycles and heavier vehicles. This is for the purpose of inspection and correct adjustment of the headlights. The professional headlight adjustment device has a built-in laser and a digital lux meter. The height is easy to adjust and the device has a rotating mirror. The dip in the dim/fog light can be read with an accuracy of 0,1%, the total adjustment range is -0,2 / +8%. Also comes with a mobile undercarriage and can be used on rails and mobile.

min. working height = 200mm

max. working height = 1500mm

Features:

  • glass lens

  • built-in laser

  • mirror visor

  • digital lux meter

  • level

  • 8% infinitely adjustable inclination angle

  • sliding mechanism to adjust the height

  • suitable for APK

Tools / Automotive / Automotive tools Fluxon KT01ALR 8720028102105
€ 961.95 Incl. VAT https://schema.org/InStock
€ 961.95 961.95 EUR