MIG/MAG torch MLT501 / welding torch / welding gun

This Soldatech welding torch has an ergonomic handle and a ball joint at the bottom of the torch. This, in combination with the optimal position of the switch, ensures great ease of use in all welding positions.

All consumables for this torch are also available.

• connection = euro connector

• length = 5 meters

• duty cycle = 100%

• load CO₂ = 400A

• load mixed gas = 350A

• water cooled

• wire diameter = 0.8 - 1.6mm

Comes standard with 4 welding torch tips M8: 2x 1.0 / 1x 1.2 / 1x 1.6

MIG/MAG torch MLT501 / welding torch / welding gun

This Soldatech welding torch with teflon liner is only suitable for Aluminum and stainless steel welding. The torch has an ergonomic handle and a ball joint at the bottom of the torch. This, in combination with the optimal position of the switch, ensures great ease of use in all welding positions.

All consumables for this torch are also available.

• connection = euro connector

• length = 4 meters

• duty cycle = 100%

• CO₂ load = 400A

• mixed gas load = 350A

• water cooled

• wire diameter = 0.8 - 1.6mm

Comes standard with 3 welding torch tips M8 for aluminum: 2x 1.0 / 1x 1.2 / 1x 1.6

MIG/MAG torch MLT501 / welding torch / welding gun

This Soldatech welding torch has an ergonomic handle and a ball joint at the bottom of the torch. This, in combination with the optimal position of the switch, ensures great ease of use in all welding positions.

All consumables for this torch are also available.

• dinse cable coupling = euro connector

• length = 3 meters

• duty cycle = 100%

• CO₂ load = 500A

• mixed gas load = 450A

• water cooled

• wire diameter = 0.8 - 1.6mm

Comes standard with 4 welding torch tips M8: 0.8 / 1.0 / 1.2 / 1.6

MIG/MAG torch MLT501 / welding torch / welding gun

This Soldatech welding torch has an ergonomic handle and a ball joint at the bottom of the torch. This, in combination with the optimal position of the switch, ensures great ease of use in all welding positions.

All consumables for this torch are also available.

• dinse cable coupling = euro connector

• length = 4 meters

• duty cycle = 100%

• CO₂ load = 500A

• mixed gas load = 450A

• water cooled

• wire diameter = 0.8 - 1.6mm

Comes standard with 4 welding torch tips M8: 0.8 / 1.0 / 1.2 / 1.6

MIG/MAG torch MLT501 / welding torch / welding gun

This Soldatech welding torch with teflon liner is only suitable for welding aluminum and stainless steel. The torch has an ergonomic handle and a ball joint at the bottom of the torch. This, in combination with the optimal position of the switch, ensures great ease of use in all welding positions.

All consumables for this torch are also available.

• dinse cable coupling = euro connector

• length = 4 meters

• duty cycle = 100%

• CO₂ load = 500A

• mixed gas load = 450A

• water cooled

• wire diameter = 0.8 - 1.6mm

Comes standard with 4 welding torch tips M8 for aluminum: 0.8 / 1.0 / 1.2 / 1.6

MIG welding machine

This MIG welding machine is the most comprehensive machine among the Soldatech Originals. It is possible to weld MIG, MMA-Electrodes and lift TIG with it. Even FLUX welding without gas is possible.

The ML175E is portable, easy to operate and has the following strong features:

• IGBT inverter technology: sustainable performance with more power.

• High-quality aluminum wire feeder.

• Induction regulator: with this control both the width and the depth of the weld pool can be regulated.

• Digital display for welding current and voltage.

• Overload protection in combination with a built-in fan.

• Infinitely adjustable.

• Hot-start: high start-up voltage, ignition in any situation.

• Anti-stick: ensures that electrodes do not stick and are easy to weld.

• 2-stroke / 4-stroke switching: with 2-stroke switch, hold down to use, ideal for small parts. With 4-stroke switch, press to start and press again to stop, ideal for larger parts.

• Voltage regulator to keep the voltage as constant as possible.

Ideal for welding carbon steel, low alloy steel and stainless steel.
Also weld aluminum and flux cored wire (MIG).
Every ML175E comes standard including:

• electrode holder with 1.5m 25mm² cable

• MLT15M3 MIG torch with euro connector and 2.5m cable

• welding ground clamp with 1.2m 16mm² cable

• 3x welding spit: 0.6 / 0.8 / 0.9mm

• 2x hose clamps

• 1x thread drive roll: 0.6 + 0.8mm

Technical specifications:

• voltage = 230V

• frequency = 50Hz

• circuit breaker 16A B-char
  

• input power = 5.7kVA

• no load voltage = 62V

• duty cycle (at 20°C ambient temperature) = 60% - 160A

• duty cycle (at 40°C ambient temperature) = 30% - 160A

• welding current range MIG/MAG = 30 - 160A

• welding current range MMA = 30 - 140A

• welding current range lift TIG = 30 - 140A

• power factor = 0.92

• insulation class = H

• protection class = IP21S

• dimensions = 420 x 195 x 300mm

• weight = 10kg

MIG welding machine

Thanks to the 230/400V switch, the Soldatech Original MG200 can be used everywhere. The transformer welding machine is suitable for both welding with gas as FLUX welding without gas, and is used for welding of steel/aluminum or stainless steel when using the appropriate optional accessories. The machine has a continuous adjustable wire speed with 6 welding positions.
Furthermore, the device is equipped with thermal protection and is cooled by a fan.
Ideal for welding carbon steel, low alloy steel and stainless steel.

Every MG200 comes standard including:

• Adapter 230V to 400V with 30cm cable

• MLT24M3 MIG torch with euro connector and 3m cable

• Welding ground clamp with 1.5m 16mm² cable

• 3x welding spit: 0.6 / 0.8 / 1.0mm

• 2x hose clamps

• 1x thread drive roll: 0.6 + 0.8mm

Note: Comes without a regulator.

Technical specifications:

• voltage = 230V - 400V

• frequency = 50Hz

• input power = 9.2kW

• duty cycle (at 20°C ambient temperature) = 25% - 200A

• duty cycle (at 40°C ambient temperature) = 10% - 200A
  

• welding current range MIG/MAG = 50 - 200A

• voltage range MIG  = 18 - 38V

• insulation class = H

• protection class = IP21S

• dimensions = 850 x 420 x 590mm

• weight = 50kg

Circuit board

Suitable for MIG-MAG welding machines MG150 and MG200.

Plasma cutter / plasma cutting machine

This Soldatech powered by HG plasma cutter cuts steel and aluminum with high-quality results. The PL100HG is among the heavier plasma cutters, it ignites very easily thanks to the HF ignition and cuts easily through rusted, coated or structured material up to 35mm. The plasma cutter has four swivel castors, making it mobile during use.

The PL100HG has a user-friendly control panel and can even be adjusted during cutting work to achieve the best cutting result.

The modern IGBT inverter technology ensures that the PL100HG delivers sustainable performance with more power and a higher duty cycle. Overload protection in combination with a built-in fan prevents overheating and ensures that high-quality cutting performance is guaranteed over a long period of time.

Ideal for cutting carbon steel, low alloy steel, stainless steel and aluminum alloys.

Each PL100HG comes standard with:

• Soldatech PL141M3 plasma torch with 5m cable

• Welding ground clamp with 3m 16mm² cable

• Gas line of 4m with hose clamps

• 5-pin 32A plug with 3m 4x2.5mm² cable

• European dinse couplers 9mm

Technical specifications:

• voltage = 400V - 3 phase

• frequency = 50/60Hz

• circuit breaker = 3x 20A B-char

• duty cycle (at 20°C ambient temperature) = 60% - 100A

• duty cycle (at 40°C ambient temperature) = 60% - 100A
  

• welding current range = 20 - 100A

• max. unloaded voltage = 325V

• max. cutting thickness = 35mm

• average air / gas consumption = 220L/min

• protection class = IP21S

• dimensions = 719 x 308 x 633mm

• weight = 43kg

Plasma cutter

This Soldatech Original plasma cutter cuts with high-quality results through almost all ferrous and non-ferrous materials. The cutter ignites very easily thanks to the HF ignition and cuts smoothly through rusted, coated or textured material up to 12mm.
The PL40E has a user-friendly control panel and can even be adjusted during cutting work, so that the best cutting result is achieved.
The modern IGBT inverter technology not only ensures that the PL40E delivers long-lasting performance with more power, but it also makes the cutter lightweight and portable. Overload protection in combination with a built-in fan prevents overheating and ensures that high-quality cutting performance is guaranteed for a long time.
Ideal for cutting low alloy steel, stainless steel and aluminum alloys.

Each PL40E comes standard including:

• Torch with 2.5m cable

• Welding ground clamp with 1.8m cable

• air/shielding gas hose 2m

• gas line 2m
  

• 3x cutting tip

• 3x cutting electrode

• 3x ceramic cap

Optimal cutting thickness (when using compressed air):

• copper = 1 - 4mm

• stainless steel = 1 - 8mm

• aluminum = 1 - 8mm

• steel = 1 - 10mm

Technical specifications:

• voltage = 230V

• frequency = 50 / 60Hz

• input power = 5.8kW

• duty cycle (at 20°C ambient temperature) = 45% - 40A

• duty cycle (at 40°C ambient temperature) = 20% - 40A

• cutting current range = 15 - 40A

• protection class = IP21S

• insulation class = H

• dimensions = 410 x 140 x 287mm
• weight = 6.4kg

Plasma cutter / plasma cutting machine

This Soldatech powered by HG plasma cutter cuts various materials with high-quality results. The PL50HG is a compact, powerful and easy to operate plasma cutter equipped with Pilot ARC pre-ignition. This in combination with the HF ignition makes this cutter very easy to ignite and it is capable of cutting through rusted, coated or structured material up to 20mm without any difficulty.

The PL50HG has a user-friendly control panel and can even be adjusted during cutting work to achieve the best cutting result.

The modern IGBT inverter technology not only ensures that the PL50HG delivers long-lasting performance with more power, but it also makes the welder lightweight and portable. Overload protection in combination with a built-in fan prevents overheating and ensures that high-quality welding performance is guaranteed for a long time.

Ideal for cutting low alloy steel, stainless steel and aluminum alloys.

Each PL50HG comes standard with:

• Soldatech PL80M5 plasma torch with 5m cable

• Welding ground clamp with 2m 16mm² cable

• Gas line of 4m with hose clamps

• Neoprene power cable 2m 3x2.5mm²

• European dinse couplers 9mm

Technical specifications:

• voltage = 230V - 1 phase

• frequency = 50/60Hz

• circuit breaker = 20A C-kar

• input power = 7.6kVA

• duty cycle (at 20°C ambient temperature) = 60% - 50A

• duty cycle (at 40°C ambient temperature) = 20% - 50A
  

• welding current range = 15 - 50A

• max. unloaded voltage = 293V

• max. cutting thickness = 20mm

• air consumption = 220L/min

• protection class = IP21S

• dimensions = 459 x 200 x 338mm

• weight = 11kg

Plasma cutter / plasma cutting machine

This Soldatech powered by HG plasma cutter cuts various materials with high-quality results. The PL70HG is a compact, powerful and easy to use plasma cutter that is equipped with Pilot ARC ignition. This in combination with the HF ignition makes this cutter very easy to ignite and it is capable of cutting smoothly through rusted, coated or structured material up to 25mm.
The PL70HG has a user-friendly control panel and can even be adjusted during cutting work to achieve the best cutting result.
The modern IGBT inverter technology not only ensures that the PL70HG delivers long-lasting performance with more power, but it also makes the welder lightweight and portable. Overload protection in combination with a built-in fan prevents overheating and ensures that high-quality welding performance is guaranteed for a long time.
Ideal for cutting low alloy steel, stainless steel and aluminum alloys.

Each PL70HG comes standard with:

• Soldatech PL80M5 plasma torch with 5m cable
• work clamp with 2m 16mm² cable
• Gas line of 4m with hose clamps
• 5-pin 32A plug with 2.5m 4x2.5mm² cable
• Standard 9mm Dinse cable couplings

Technical specifications:

• voltage = 400V - 3 phase
• frequency = 50/60Hz
• fuse protection = 20A B-char
• input power = 9.4kVA
• duty cycle (at 20°C ambient temperature) = 100% - 70A
• duty cycle (at 40°C ambient temperature) = 60% - 70A
• welding current range = 25 - 70A
• max. unloaded voltage = 330V
• recommended cutting thickness = 17mm
• max. cutting thickness = 25mm
• average air / gas consumption = 220L/min
• protection class = IP21S
• dimensions = 550 x 245 x 405mm
• weight = 23.5kg
  

Plasma torch CUT40 / plasma cutting torch / cutting torch

This Soldatech plasma cutting torch has an ergonomic handle and a ball joint at the bottom of the torch. This, in combination with the optimal position of the switch, ensures great ease of use in all cutting positions.
The connection is made via a union nut with a connection thread (M16x1.5 mm screw connection). The switching contact for the ignition is established via a 2-pin connector plug.
All consumables for this torch are also available.
Suitable for several plasma cutters being sold in Europe incl.: Parkside PPS40B2, AVALON40, Stamos s-cutter 50.1 & S-cutter 40.
Plasmacutter torch CUT40 comes standard with:

• 3x CUT40WTT TIP,
• 3x CUT40WTC Ceramic cap,
• 3x CUT40WTTH Electrode,
• 1x CUT40WTCR Ceramic Ring.

Specifications:

• Length = 3 meters
• Connection =  euro connector threaded joint M16 x 1.5mm
  
• Duty cycle = 50%
• Current = 40A
• Air pressure = 3.5 - 6.5 bar
• Air consumption = 80L/min

Plasma torch PL141 / plasma cutting torch / cutting torch

This Soldatech cutting torch has an ergonomic handle and a ball joint at the bottom of the torch. This, in combination with the optimal position of the switch, ensures great ease of use in all cutting positions.

All consumables for this torch are also available.

• connection = euro connector

• length = 6 meters

• duty cycle = 60%

• current = 140A

• air pressure = 4.5 - 5.0 bar

• air / gas flow = 220L/min

Includes:

• 2-point spacer = 1x PL141A
• ceramic head= 1x PL141C
• TIP 1.7mm = 1x PL141
• gas distributor = 1x PL141D
• LT141 insulation ring = 1x PL141R
• electrode = 1x PL141E
• LT141 gas pin = 1x PL141P
• LT141 rubber ring = 1x PL141RR
  

Plasma torch PL80 / plasma cutting torch / cutting torch

This Soldatech cutting torch has an ergonomic handle and a ball joint at the bottom of the torch. This, in combination with the optimal position of the switch, ensures great ease of use in all cutting positions.

All consumables for this torch are also available.

• connection = euro connector

• length = 5 meters

• duty cycle = 60%

• current = 80A

• air pressure = 4.5 - 5.0 bar

• air / gas consumption = 220L/min

Includes:

• ceramic head = 1x CUT80WTC
  
• TIP = 2x 1.1mm
• electrode = 2x CUT80WTTH
• disassembly key
  

Rubber ring plasma torch

Suitable for the plasma torch PL141.

• price per piece

Rubber ring plasma torch

Suitable for the plasma torch PL141.

• 10 pieces

Plasma cutter wear parts set

This set of consumables are suitable for the CUT40WT plasma torch. The set consists of the following parts:

• 2 electrodes

• 4 cutting tips

• 2 ceramic heads

• 2 ceramic rings

Spot weld nozzle

Suitable for the MIG MAG torch MLT25.

• diameter = 22mm

• bore size = 15mm

• length = 68mm

Spot weld nozzle

Suitable for the MIG MAG torch MLT25.

• diameter = 22mm

• bore size = 15mm

• length = 68mm

• 10 pieces