Assorted fir tree fixings Contains all kinds of fir tree fixings for general applications and vehicles. Suitable for a number of vehicles: Ford, GM, Mazda, Nissan, Toyota and VW. Content: - 30x radiator yoke, fender and bumper shield retainer - 30x fender and bumper shield retainer - 15x interior trim panel retainer - 15x door trim panel retainer - 50x door weather strip retainer - 10x bumper fascia retainer - 35x hood insulation retainer - 30x fender and bumper shield retainer - 50x cowl grille retainer - 25x retainer for battery post cable shield, radiator side air baffle - 20x retainers - 30x trim panel retainer
Motorcycle special socket
For assembling and disassembling of the full floating axle of a motorcycle.
Suitable for:
- 19mm = Honda
- 22mm = Kawasaki, BMW
- 24mm = Suzuki, Honda, BMW K1, K1000
Ball joint extractor set
This set is suitable for unmounting steering rods and for all kinds of other types of dismantling work. Thanks to the wedge-shaped forks, hinge pins clamped in the conical seat can be quickly released.This set comes in a handy plastic transport case.
Content:
1x steering fork 17mm opening
1x steering fork 24mm opening
1x steering fork 28mm opening
handle for manual use 200mm long
adapter for pneumatic use 180mm long
Bearing puller set This bearing puller set is suited for the loosening of bearings, inner rings, bolts, nuts and pulleys. Content:
1 bearing splitter 30-50mm (1-1/4" - 2-1/4")
1 bearing splitter 50-75mm (2-1/4" - 3-1/4")
H-type puller head
forcing screw
2x 4" extension screw external and internal
2x 5" extension screw external and internal
2x 4" extension screw external
2x 5" extension screw external
Bearing puller set This bearing puller set is suited for the loosening of bearings, bolts, nuts and pulleys.
capacity = 20 - 100mm
1x bearing separator
4x main rod
1x H-beam
1x hydraulic ram
1x extension rod
Bearing race and seal driver set / seal mounting set
This set is suitable for assembling shafts, bearings and seals without damaging the housing of the shaft. The flanges are made of sturdy aluminum and go up to 81mm. This makes the set suitable for almost all standard wheel bearings. The flat side of the flange is used for the seals and the other side for installing the seal rings. The handle has a ribbed area for extra grip.
1x handle
9x aluminum flange = 39,5 / 44,5 / 50 / 59 / 63 / 65 / 72 / 76 and 81mm
drive = 14mm
Screw thread reparation set / oil drain repair kit
Ideal for repairing of severely damaged screw thread of carter plugs.
This set is suitable for the following car brands: Audi, BMW, Citroën, Mercedes-Benz, Ford, Fiat, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugoet, Porsche, Renault, Saab, Seat, Skoda, Toyota, Volvo and VW.
- 4x thread taps = M13 x 1,5 - M15 x 1,5 - M17 x 1,5 - M20 x 1,5
- 5x carter plug M13 x 1,5 10 sealing rings
- 5x carter plug M15 x 1,5 10 sealing rings
- 5x carter plug M17 x 1,5 10 sealing rings
- 5x carter plug M20 x 1,5 10 sealing rings
Chain oil filter wrench / crescent chain wrench Suitable for pipes with a diameter of 70 tot 120mm. The wrench has a length of 400mm and is easy to adjsut and click to 500 and 600mm.
Clutch aligning set
This universal centering set is suitable for very accurate and simple centering of the clutch plate on vehicles with top bearing.
1x centering mandrel with screw thread
8x adapter in sizes: 11 x 18mm, 12 x 18mm, 15 x 18mm, 17 x 18mm, 19 x 18mm, 20 x 18mm, 21 x 18mm, 25 x 18mm
1x conical adapter for larger sizes
Interior clips assortment This 192-piece assortment box contains interior clips for dashboard panels, door panels and coating of various vehicles such as Chrysler, Ford, GM, Honda, Renault, Toyota and Volkswagen. Content:
30x ø hole = 6,3mm / ø head = 18mm / length = 2,4 - 13,7mm
20x ø hole = 6,3mm / ø head = 17,3mm / length = 14,3mm
15x ø hole = 7mm / ø head = 19mm / length = 3,2 - 28,5mm
20x ø hole = 8mm / ø head = 20mm / length = 11mm
20x ø hole = 8mm / ø head = 19mm / length = 2 - 12,5mm
12x ø hole = 8mm / ø head = 20mm / length = 20mm
20x ø hole = 9mm / ø head = 16mm / length = 1,5 - 13mm
10x ø hole = 9mm / ø head = 18mm / length = 28mm
10x ø hole = 9,5mm / ø head = 25mm / length = 3 - 14,5mm
15x ø hole = 10mm / ø head = 20mm / length = 13mm
10x ø hole = 10mm / ø head = 21mm / length = 1 - 20mm
10x ø hole = 10mm / ø head = 20mm / length = 18mm
Coil spring compressor set manual
This coil spring compressor set is suitable for quick and safe repair or replacement of the shock absorber and spring strut sets. The robust set is made of hard steel, which guarantees safety and a long service life.
max. working range = 265mm
Oil filter caps / oil filter cap set / oil filter disassembly set
This set is suitable for mounting and dismounting almost any oil filter from a large number of types of cars and motorcycles.Caps with 14, 15, 30 and 36P are suitable for all filters from 65mm to 100mm.\
drive = 3/8"
adaptor 1/2" to 3/8"
Sizes caps:
65mm 14P = Toyota / Nissan
65 / 67mm 14P = Ford / Mazda
68mm 14P = Mazda / Ford / Subaru
73mm 14P = Toyota / Audi / Rover / Lexus / Austin
74 / 76mm 15P = VW / Audi / GM / Mercedes / Opel
75 / 77mm 15P = Fiat / Renault
76mm 14P = Motorcraft / Ford
76mm 30P = Fiat / Lancia
80mm 15P = Mazda / Subaru / Toyota / Honda / Nissan
80 / 82mm 15P = Volvo
90mm 15P = Fiat
93mm 15P = Nissan / VW / Porsche / Renault / Honda / Audi
93mm 36P = Ford / Motorcraft
100mm 15P = Isuzu / Mitsubishi
Brake line flare set
This flaring set is suitable for double and single flares of copper, aluminum and mild steel brake lines and brass tubes up to 45 degrees.
5 adapters in the sizes = 3/16", 1/4", 5/16", 3/8" and 1/2" (4.8, 6.4, 7.9,9.5 and 12.7mm)
pipe holder
spreader
Exhaust pipe expander kit
This set is suitable for expanding or to re-round the exhaust pipe.
3 expanders:
28 to 44mm
38 to 63mm
54 to 88mm
Exhaust rubber hooks This hook set is used for applying or removing exhaust rubbers. - 1 curved hook - 1 flat hook 90 degrees
Exhaust pipe compressor Suitable for removing and replacing of steel exhaust clamps from Audi, Seat, Skoda and VW vehicles.
This flaring set is suitable for double and single collars of copper, aluminum and mild steel brake lines and brass pipes up to 45 degrees.
pipe holder with metric sizes = 6, 8, 10, 12, 16 and 19mm
pipe holder with inch sizes = 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4"
pipe cutter
Glow plug repair set / glow plug puller kit
This set is suitable for removing damaged or hard to reach glow plugs from the cylinder head and repairing damaged threads. Suitable for glow plugs with either an M8 x 1.0 thread or and M10 x 1.0 thread. The expanded set has everything to remove the damaged glow plug without damaging the cylinder head.The set is specially designed for clearing and cleaning the glow plug bore and sealing seat. Any unwanted carbon can also be removed from the borehole.
1x puller for stuck glow plugs
2x step drill = 7 x 5.5mm and 9 x 5.5mm
2x HSS drill = 3.5mm
3x thread tap = M8 x 1.0 / M10 x 1.0 / 6.3 (1/4") - 28UNF
1x T-handle with ratchet function
1x E10 torx socket
1x drill adapter
1x power bolt
1x power nut
1x Allen key
2x centering socket for drill 3.5mm
Headlight tester set / headlight adjustment set
This headlight tester set includes rails, H-base and headlight tester. The headlight tester set is suitable for testing the headlights of cars, motorcycles and heavier vehicles. This is for the purpose of inspection and correct adjustment of the headlights. The professional headlight adjustment device has a built-in laser and a digital lux meter. The height is easy to adjust and the device has a rotating mirror. The dip in the dim/fog light can be read with an accuracy of 0,1%, the total adjustment range is -0,2 / +8%. Also comes with a mobile undercarriage and can be used on rails and mobile.
min. working height = 200mm
max. working height = 1500mm
Features:
glass lens
built-in laser
mirror visor
digital lux meter
level
8% infinitely adjustable inclination angle
sliding mechanism to adjust the height
suitable for APK