Compression tester kit diesel
This tester kit is suitable for the measurement of compression loss in almost every diesel engine from both cars and trucks. The pressure gauge has a range of 0 - 70bar (0 - 1000psi) and a flexible hose of 360mm. Furthermore, the compression meter is equipped with a built-in resetter.
4 injector adapters:
M20 x 1,5 x 75mm
M22 x 1,5 x 73mm
M24 x 1,5 x 88mm
M24 x 2,0 x 63mm
9 glow plugs adapters:
M10 x 1,0 x 83mm
M10 x 1,0 x 91mm
M10 x 1,0 x 102mm
M10 x 1,0 x 113mm
M10 x 1,0 x 119mm
M10 x 1,25 x 64mm
M10 x 1,25 x 135mm
M12 x 1,25 x 47mm
M22 x 1,5 x 118mm
Vacuum tester brake and bleeding kit This set is suitable for checking the pressure and vacuum systems, but is also suitable for brake bleeding and testing under or over pressure valves.
Content:
1 switchable hand pump, for both pumping and sucking
11 universal adapters
2 brake nipple adapters
2x fluid reservoir
2x long hose
3x short hose
Truck compression gauge / compression test set
This compression test set is suitable for checking the condition of a diesel engine. With no fewer than 7 adapters, the set is suitable for almost all truck diesel engines.The set consists of a pressure gauge with hose, a 90 degree fitting and 7 adapters.The pressure gaug is clearly legible, has 2 scales, a vent valve, a range of 0 - 70bar (0 - 1000psi) and a flexible hose of 360mm with a quick coupling at the end. The 7 adapters can easily be connected here. The 90 degree fitting ensures that hard to reach places are also accessible.Furthermore, the compression meter is equipped with a built-in resetter.
Spark plug adapters:
M10 x 1.0 x 68mm
M10 x 1.25 x 54mm
M10 x 1.25 x 68mm
M12 x 1.25 x 45mm
Nozzle adapters:
M18 x 1.5
M24 x 1.5
M24 x 2.0
Common rail diesel tester set
This retour flow meter with adaptors is suitable for measuring how much fuel the injectors return. This makes it immediately clear whether an injector is defective.With this set it is possible to control up to 6 injectors at the same time from the systems of Bosch, Denso, Siemens and Delphi.
6x adapter for Bosch injectors
6x adapter for Denso injectors
6x adapter for Siemens injectors
6x adapter for Delphi injectors
6x measuring tube 95ml
6x measuring cup 105ml with connecting hoses of 65cm and a connecting piece
1x aluminum strip with hook for mounting on the hood
Cylinder leak detection kitThis cylinder leak detection set is suitable for testing the engine for problems such as damaged valves, worn sealing rings and leaking head gaskets. The pressure gauge has a range of 0 - 7 bar (0 - 100psi). The leakage meter measures from 0 - 100% leakage in steps of 5%.The set is suitable for any gasoline engine with spark plugs of 12mm and 14mm of almost all cars, motorcycles and trucks.
pressure gauge
leakage gauge
2x spark plug adapter
hose
Olie pressure gauge / universal oil pressure tester / oil pressure test kit
This oil pressure test set is suitable for checking the oil pressure of an engine. Diagnoses oil pumps and motors, oil pressure switches and indicators. With no less than 10 adapters, the set is suitable for almost all engines.The set consists of a pressure gauge with hose, a 90 degree universal joint and 10 adapters.The pressure gauge is clearly legible, has 2 scales, has a vent valve, a range of 0 - 10bar (0 - 140psi) and a flexible hose of 1200mm with a quick coupling at the end. The 10 adapters can easily be connected here. The 90 degree universal joint ensures that hard to reach places are also accessible.
Adapter sizes:
R 1/8" DIN 2999
1/8" x 27 NPT
1/4" x 18 NPT
3/8" x 20 UNF
1/2" x 20 UNF
M10 x 1,0
M12 x 1,2
M14 x 1,5
M16 x 1,5
M18 x 1,5
Compression tester kit
This tester set is suitable for quickly measuring cmopression loss in car and motorcycle. This way can be find out whether the vehicle's engine has internal defects, such as broken valves, worn piston rings or gaskets or an unnecessary amount of carbon.The set consists of a pressure gauge with a range of 0 - 20 bar (0 - 300psi), a flexible hose of +/- 45cm, a straight and bent pressure tube with rubber conical connection and several adapters with screw thread: M10, M12, M14 and M18.The pressure gauge is clearly legible, has 2 scales and has a vent valve. The straight and bent pressure tubes do not have to be turned and are therefore suitable for almost any motor.
Compression tester kitThis tester set is suitable for quickly measuring cmopression loss in car and motorcycle. This way can be find out whether the vehicle's engine has internal defects, such as broken valves, worn piston rings or gaskets or an unnecessary amount of carbon.The set consists of a pressure gauge with a range of 0 - 20 bar (0 - 300psi), a flexible hose of +/- 45cm, a straight pressure tube with rubber conical connection.The pressure gauge is clearly legible, has 2 scales and has a vent valve. The straight pressure tube does not have to be turned and is therefore suitable for almost any motor.