Plasma cutter
This Soldatech Original plasma cutter cuts with high-quality results through almost all ferrous and non-ferrous materials. The cutter ignites very easily thanks to the HF ignition and cuts smoothly through rusted, coated or textured material up to 12mm.The PL40E has a user-friendly control panel and can even be adjusted during cutting work, so that the best cutting result is achieved.The modern IGBT inverter technology not only ensures that the PL40E delivers long-lasting performance with more power, but it also makes the cutter lightweight and portable. Overload protection in combination with a built-in fan prevents overheating and ensures that high-quality cutting performance is guaranteed for a long time.Ideal for cutting low alloy steel, stainless steel and aluminum alloys.
Each PL40E comes standard including:
Torch with 2.5m cable
Welding ground clamp with 1.8m cable
air/shielding gas hose 2m
3x cutting tip
3x cutting electrode
3x ceramic cap
Optimal cutting thickness (when using compressed air):
copper = 1 - 4mm
stainless steel = 1 - 8mm
aluminum = 1 - 8mm
steel = 1 - 10mm
Technical specifications:
voltage = 230V
frequency = 50 / 60Hz
input power = 5.8kW
duty cycle (at 20°C ambient temperature) = 45% - 40A
duty cycle (at 40°C ambient temperature) = 20% - 40A
cutting current range = 15 - 40A
insulation class = H
Plasma cutter / plasma cutting machine
This Soldatech powered by HG plasma cutter cuts steel and aluminum with high-quality results. The PL100HG is among the heavier plasma cutters, it ignites very easily thanks to the HF ignition and cuts easily through rusted, coated or structured material up to 35mm. The plasma cutter has four swivel castors, making it mobile during use.
The PL100HG has a user-friendly control panel and can even be adjusted during cutting work to achieve the best cutting result.
The modern IGBT inverter technology ensures that the PL100HG delivers sustainable performance with more power and a higher duty cycle. Overload protection in combination with a built-in fan prevents overheating and ensures that high-quality cutting performance is guaranteed over a long period of time.
Ideal for cutting carbon steel, low alloy steel, stainless steel and aluminum alloys.
Each PL100HG comes standard with:
Soldatech PL141M3 plasma torch with 5m cable
Welding ground clamp with 3m 16mm² cable
Gas line of 4m with hose clamps
5-pin 32A plug with 3m 4x2.5mm² cable
European dinse couplers 9mm
voltage = 400V - 3 phase
frequency = 50/60Hz
circuit breaker = 3x 20A B-char
duty cycle (at 20°C ambient temperature) = 60% - 100A
duty cycle (at 40°C ambient temperature) = 60% - 100A
welding current range = 20 - 100A
max. unloaded voltage = 325V
max. cutting thickness = 35mm
average air / gas consumption = 220L/min
protection class = IP21S
dimensions = 719 x 308 x 633mm
weight = 43kg
Plasma cutter / plasma cutting machineThis Soldatech powered by HG plasma cutter cuts various materials with high-quality results. The PL70HG is a compact, powerful and easy to use plasma cutter that is equipped with Pilot ARC ignition. This in combination with the HF ignition makes this cutter very easy to ignite and it is capable of cutting smoothly through rusted, coated or structured material up to 25mm.The PL70HG has a user-friendly control panel and can even be adjusted during cutting work to achieve the best cutting result.The modern IGBT inverter technology not only ensures that the PL70HG delivers long-lasting performance with more power, but it also makes the welder lightweight and portable. Overload protection in combination with a built-in fan prevents overheating and ensures that high-quality welding performance is guaranteed for a long time.Ideal for cutting low alloy steel, stainless steel and aluminum alloys.Each PL70HG comes standard with:
This Soldatech powered by HG plasma cutter cuts various materials with high-quality results. The PL50HG is a compact, powerful and easy to operate plasma cutter equipped with Pilot ARC pre-ignition. This in combination with the HF ignition makes this cutter very easy to ignite and it is capable of cutting through rusted, coated or structured material up to 20mm without any difficulty.
The PL50HG has a user-friendly control panel and can even be adjusted during cutting work to achieve the best cutting result.
The modern IGBT inverter technology not only ensures that the PL50HG delivers long-lasting performance with more power, but it also makes the welder lightweight and portable. Overload protection in combination with a built-in fan prevents overheating and ensures that high-quality welding performance is guaranteed for a long time.
Ideal for cutting low alloy steel, stainless steel and aluminum alloys.
Each PL50HG comes standard with:
Soldatech PL80M5 plasma torch with 5m cable
Welding ground clamp with 2m 16mm² cable
voltage = 230V - 1 phase
circuit breaker = 20A C-kar
input power = 7.6kVA
duty cycle (at 20°C ambient temperature) = 60% - 50A
duty cycle (at 40°C ambient temperature) = 20% - 50A
welding current range = 15 - 50A
max. unloaded voltage = 293V
max. cutting thickness = 20mm
air consumption = 220L/min
dimensions = 459 x 200 x 338mm
weight = 11kg
