Hydraulic cylinder

Hardy underlay to avoid axis break when it is overloading.
The surface of principle axis is finished with chrome plate.
Plunger has the function of retracting automatically.
Surface coating resists corrosion.

- output = 5 ton
- stroke = 50mm
- effective area = 9,6cm^2
- oil capacity = 0,036 L
- height of product = 133mm
- extended height = 183mm
- outside diameter = 40mm
- bore diameter = 30mm
- plunger diameter = 25mm
- thread for input oil port (ZG) = 1/4" - 18
- saddle protrusion form plgr = 13mm
- saddle is removable
- max. pressure = 700bar

Degreaser gun with brush

• hose connector = 6mm

Draw stud

• size thread = 

• suitable for the rectangular punches = 92 x 92mm / 92 x 118mm

Draw stud

• size thread = 

• suitable for the round punches = 16mm / 20mm / 22mm / 22,5mm / 25mm / 26,2mm / 27,5mm

Draw stud

• size thread = 3/4''

• suitable for the round punches = 28mm / 28,5mm / 32mm / 32,5mm / 34mm / 34,6mm / 39mm / 40mm / 43mm / 43,2mm / 49mm / 49,6mm / 51mm / 60mm / 61,5mm / 82mm

Draw stud

• size thread = 

• suitable for the rectangular punches = 35 x 52mm / 35 x 65mm / 35 x 82mm / 35 x 112mm / 46 x 46mm / 164 x 85mm

Draw stud

• size thread = 

• suitable for the rectangular punches = 68 x 68mm

Drum trolley

With a capacity of 300kg, robust welded stainless steel construction and 4 swivel castors, this drum trolley is very suitable for the easy transport of upright 200L drums.

• capacity = 300kg

• oil drum size = 200L

• diameter = 610mm

• castor size = 75 x 35mm

• material = stainless steel

Electric hydraulic pump

Small volume pump with high-performance motor.
The speed and electric power are automatically adjusted during lifting.
Even under high pressure (32MPa), the pump starts easy.
Easy to take anywhere.

- voltage = AC220V 50Hz
- rated power = 0,75Kw
- low pressure = 2,5 Mpa / 25bar
- high pressure = 70Mpa / 700bar
- max. working pressure = 70Mpa / 700bar
- output low pressure = 4 L/min
- output hoge druk = 0,5 L/min
- oil capacity = 2 Ltr

Scissor lift table / scissor table / platform lift / lift table / fixed lift table

This Mammuth fixed, electric lift table is ideal for moving machines and goods up to 1000kg in height. The table can be used both as built-in and surface-mounted. The lift is equipped with a switch box that is mounted under the table and a safety edge. This edge ensures that the lift stops lowering when something gets underneath.

Due to the electrical operation, ergonomic work is guaranteed.

Technical specifications:

• capacity = 1000kg

• minimum height = 210mm

• maximum height = 1000mm

• platform size = 1300 x 820mm

• platform height = 60mm

• lifting time unloaded = 21 sec.

• cable control length = 3,7m

• voltage = 230V

• power = 1,1kW

• oil capacity = 1,5L

Note: The lifting table is supplied without a plug!

Scissor lift table / scissor table / platform lift / lift table / fixed lift table

This Mammuth fixed, electric lift table is ideal for moving machines and goods up to 1000kg in height. The table can be used both as built-in and surface-mounted. The lift is equipped with a switch box that is mounted under the table and a safety edge. This edge ensures that the lift stops lowering when something gets underneath.

Due to the electrical operation, ergonomic work is guaranteed.

Technical specifications:

• capacity = 2000kg

• minimum height = 230mm

• maximum height = 1000mm

• platform size = 1600 x 1000mm

• platform height = 60mm

• lifting time unloaded = 17 sec.

• cable control length = 3,7m

• voltage = 400V

• power = 2,2kW

• oil capacity = 3L

Note: The lifting table is supplied without a plug!

Electric scissor jack

- min. height = 130mm
- max. height = 350mm
- capacity = 2000kg
- voltage = 12V
- current (unloaded) = 8amp

Garage press / bearing press / frame press

This Mammuth electric press is very suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other pressing work that requires a lot of power. The is press is of high quality and consists of a heavy, robust, fully welded frame. This makes the press very solid and stable.
The work bed is easy to adjust in height using the winch and handle. The cylinder can also be slid from left to right using the same handle.

The press comes standard with a safety grille, foot pedal, emergency stop and two press blocks.

Please note: the press is supplied without CH22 hydraulic oil (29 liters).

Specifications:

• capacity = 100 ton

• cylinder stroke = 300mm

• bed width = 800mm

• bed depth = 342mm

• working range = 945mm

• power = 1,5kW

• voltage = 400V

• speed = 1400rpm

• outgoing press speed = 12 - 24cm/min or 2 - 2,33mm/sec

• incoming press speed = 21 - 23cm/min or 3,5 - 3,83mm/sec

Packed in 2 boxes:
115 x 42 x 216cm 735kg
52,5 x 36,5 x 79cm 85kg

Garage press / bearing press / frame press

This Mammuth electric press is very suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other pressing work that requires a lot of power. The is press is of high quality and consists of a heavy, robust, fully welded frame. This makes the press very solid and stable.
The work bed is easy to adjust in height using the winch and handle. The cylinder can also be slid from left to right using the same handle.

The press comes standard with a safety grille, foot pedal and an emergency stop.

Please note: the press is supplied without CH22 hydraulic oil (29 liters).

Specifications:

• capacity = 150 ton

• cylinder stroke = 350mm

• bed width = 1000mm

• bed depth = 460mm

• working range = 945mm

• power = 1,5kW

• voltage = 400V

• speed = 1400rpm

• outgoing press speed = 12 - 24cm/min or 2 - 2,33mm/sec

• incoming press speed = 21 - 23cm/min or 3,5 - 3,83mm/sec

Packed in 2 boxes:
138 x 56,5 x 225cm 1200kg
52,5 x 36,5 x 79cm 85kg

Note: This press comes without press blocks. Look below at related items for the relevant press blocks.

Garage press / bearing press / frame press

This Mammuth electric press is very suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other pressing work that requires a lot of power. The is press is of high quality and consists of a heavy, robust, fully welded frame. This makes the press very solid and stable.
The work bed is easy to adjust in height using the winch and handle.

The press comes standard with a safety grille, foot pedal, emergency stop and two press blocks.

Please note: the press is supplied without CH22 hydraulic oil (29 liters).

Specifications:

• capacity = 50 ton

• cylinder stroke = 200mm

• bed width = 730mm

• working range = 1018mm

• power = 1,5kW

• voltage = 400V

• speed = 1400rpm

• outgoing press speed = 12 - 24cm/min or 2 - 2,33mm/sec

• incoming press speed = 21 - 23cm/min or 3,5 - 3,83mm/sec

Packed in 2 boxes:
98,8 x 31,5 x 202cm 328kg
52,5 x 36,5 x 79cm 85kg

Garage press / bearing press / frame press

This Mammuth electric press is very suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other pressing work that requires a lot of power. The is press is of high quality and consists of a heavy, robust, fully welded frame. This makes the press very solid and stable.
The work bed is easy to adjust in height using the winch and handle.

The press comes standard with a safety grille, foot pedal, emergency stop and two press blocks.

Please note: the press is supplied without CH22 hydraulic oil (29 liters).

Specifications:

• capacity = 75 ton

• cylinder stroke = 250mm

• bed width = 800mm

• bed depth = 280mm

• working range = 945mm

• power = 1,5kW

• voltage = 400V

• speed = 1400rpm

• outgoing press speed = 12 - 24cm/min or 2 - 2,33mm/sec

• incoming press speed = 21 - 23cm/min or 3,5 - 3,83mm/sec

Packed in 2 boxes:
109 x 32,5 x 204cm 463kg
52,5 x 36,5 x 79cm 85kg

Workshop crane foldable / motor hoist / garage crane

This Mammuth engine crane is extremely suitable for (dis)assembling engine blocks, but is also often used for lifting and moving other heavy objects. The arm of the crane can be locked in four different positions: 250kg, 500kg, 750kg and 1000kg. The locking pin has a handy handle.
The hoist is equipped with a rotary knob to lower the arm, which ensures high ease of use and extra safety.
Furthermore, the crane is foldable and therefore easy to store.

Specifications:

• height range 1000kg = 1920mm

• height range 750kg = 1990mm

• height range 500kg = 2050mm

• height range 250kg = 2120mm

• total length crane arm 1000kg = 1080mm

• total length crane arm 750kg = 1170mm

• total length crane arm 500kg = 1260mm

• total length crane arm 250kg = 1350mm

• height of the legs = 160mm

• distance between legs at widest point = 940mm

• dimensions folded = 570 x 485 x 1520mm

This engine leveler is specifically designed for engine cranes or hoists to balance a load during lifting.

Adjust the load's center of gravity by turning the handle.

• capacity = 680kg

Engine stand

- heavy duty steel construction
- ball bearing wheels and casters for easy mobility - - capacity = 450kg

Engine stand foldable

• heavy duty steel construction

• super strong 680kg capacity 33% greater than standard engine stands

• ball bearing wheels and casters for easy mobility

• folding design for easy storage

• eight position rotary head