Press / Garage press / bearing press / workshop press
This Mammuth press is extremely suitable for mounting bearings, pressing in shafts and bolts, bending pipes and other press work where great force is required. The press has a fully welded solid frame. The pressure in kilograms can be clearly read on the integrated pressure gauge. The hydraulic cylinder can be moved in width (with bearings). The cylinder is also equipped with an interchangeable recording press head and integrated hydraulic two-stage pump. This built-in two-stage system provides a large stroke at low back pressure and a small controllable stroke at higher back pressure, so pressing work can be performed accurately. The work bed is easy to adjust in height using the winch. Thanks to the pneumatic pump system, the press can be operated with compressed air via the foot pedal or by hand.
The press comes standard with two multifunctional press blocks and a parts tray.
Technical specifications
capacity = 100 tons
working air pressure = 8-12 bar
bed width = 850mm
bed depth = 280mm
minimum distance bed/cylinder = 185mm
cylinder stroke = 300mm
| Dimensions du produit : | |
|---|---|
| Longueur du produit | 1 255 mm |
| Largeur du produit | 750 mm |
| Hauteur du produit | 1 938 mm |
| Poids du produit | 650,0 Kg |
| Dimensions de l'emballage : | |
| Longueur du paquet | 1 950 mm |
| Largeur du paquet | 1 300 mm |
| Hauteur du paquet | 400 mm |
| Poids du Colis | 700,00 Kg |